develooper Front page | perl.daily-build.reports | Postings from January 2022

Smoke [blead] v5.35.8-29-g4ccd1515c8 PASS linux 5.10.0-10-amd64[Debian GNU/Linux 11.2 (x86_64/1 cpu)

From:
Carlos Guevara
Date:
January 31, 2022 15:13
Subject:
Smoke [blead] v5.35.8-29-g4ccd1515c8 PASS linux 5.10.0-10-amd64[Debian GNU/Linux 11.2 (x86_64/1 cpu)
Message ID:
20220131151245.63B4542DC1@cjg-bullseye
Automated smoke report for branch blead 5.35.9 patch 4ccd1515c853f1aacf08724b43b8c63a88e407c4 v5.35.8-29-g4ccd1515c8
cjg-bullseye: Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.10GHz (GenuineIntel 2100MHz) (x86_64/1 cpu)
    on        linux - 5.10.0-10-amd64 [Debian GNU/Linux 11.2 (bullseye)]
    using     g++ version 10.2.1 20210110
    smoketime 6 hours 54 minutes (average 34 minutes 33 seconds)

Summary: PASS

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:       - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.35.8-29-g4ccd1515c8  Configuration (common) -Dcc=g++
----------- ---------------------------------------------------------
O O         
O O         -Duse64bitall
O O         -Dusequadmath
O O         -Duseithreads
O O         -Duseithreads -Duse64bitall
O O         -Duseithreads -Dusequadmath
| +--------- -DDEBUGGING
+----------- no debugging


Testsuite was run only with 'harness'

Tests skipped on user request:
    # One test name on a line
MANIFEST did not declare '.mailmap'

Compiler messages(gcc):
awk: cmd. line:1: warning: regexp escape sequence `\=' is not a known regexp operator
Makefile:258: warning: ignoring prerequisites on suffix rule definition
Makefile:254: warning: ignoring prerequisites on suffix rule definition
makefile:258: warning: ignoring prerequisites on suffix rule definition
makefile:254: warning: ignoring prerequisites on suffix rule definition
builtin.c:215:1: warning: missing initializer for member 'BuiltinFuncDescriptor::xsub' [-Wmissing-field-initializers]
builtin.c:215:1: warning: missing initializer for member 'BuiltinFuncDescriptor::checker' [-Wmissing-field-initializers]
builtin.c:215:1: warning: missing initializer for member 'BuiltinFuncDescriptor::ckval' [-Wmissing-field-initializers]
inflate.c: In function 'int inflate(z_streamp, int)':
inflate.c:724:25: warning: this statement may fall through [-Wimplicit-fallthrough=]
inflate.c:725:9: note: here
inflate.c:732:25: warning: this statement may fall through [-Wimplicit-fallthrough=]
inflate.c:733:9: note: here
inflate.c:947:25: warning: this statement may fall through [-Wimplicit-fallthrough=]
inflate.c:948:9: note: here
inflate.c:968:25: warning: this statement may fall through [-Wimplicit-fallthrough=]
inflate.c:969:9: note: here
MD5.xs: In function 'MD5_CTX* get_md5_ctx(SV*)':
MD5.xs:470:27: warning: type qualifiers ignored on cast result type [-Wignored-qualifiers]
MD5.xs: In function 'SV* new_md5_ctx(MD5_CTX*, const char*)':
MD5.xs:492:40: warning: type qualifiers ignored on cast result type [-Wignored-qualifiers]
../../embed.h:633:63: note: in definition of macro 'sv_magicext'
ListUtil.xs: In function 'void XS_List__Util_zip(CV*)':
ListUtil.xs:1619:33: warning: comparison of integer expressions of different signedness: 'size_t' {aka 'long unsigned int'} and 'int' [-Wsign-compare]
ListUtil.xs:1624:33: warning: comparison of integer expressions of different signedness: 'size_t' {aka 'long unsigned int'} and 'int' [-Wsign-compare]
ListUtil.xs:1639:31: warning: comparison of integer expressions of different signedness: 'int' and 'size_t' {aka 'long unsigned int'} [-Wsign-compare]
ListUtil.xs:1658:31: warning: comparison of integer expressions of different signedness: 'int' and 'size_t' {aka 'long unsigned int'} [-Wsign-compare]
Socket.xs: In function 'void XS_Socket_inet_aton(CV*)':
Socket.xs:773:28: warning: missing initializer for member 'addrinfo::ai_family' [-Wmissing-field-initializers]
Socket.xs:773:28: warning: missing initializer for member 'addrinfo::ai_socktype' [-Wmissing-field-initializers]
Socket.xs:773:28: warning: missing initializer for member 'addrinfo::ai_protocol' [-Wmissing-field-initializers]
Socket.xs:773:28: warning: missing initializer for member 'addrinfo::ai_addrlen' [-Wmissing-field-initializers]
Socket.xs:773:28: warning: missing initializer for member 'addrinfo::ai_addr' [-Wmissing-field-initializers]
Socket.xs:773:28: warning: missing initializer for member 'addrinfo::ai_canonname' [-Wmissing-field-initializers]
Socket.xs:773:28: warning: missing initializer for member 'addrinfo::ai_next' [-Wmissing-field-initializers]
HiRes.xs: In function 'void XS_Time__HiRes_setitimer(CV*)':
../../perl.h:570:30: warning: option '-Wc++-compat' is valid for C/ObjC but not for C++ [-Wpragmas]
../../perl.h:573:30: note: in expansion of macro 'GCC_DIAG_PRAGMA'
../../perl.h:581:33: note: in expansion of macro 'GCC_DIAG_IGNORE'
HiRes.xs:1248:9: note: in expansion of macro 'GCC_DIAG_IGNORE_STMT'
HiRes.xs: In function 'void XS_Time__HiRes_getitimer(CV*)':
HiRes.xs:1268:9: note: in expansion of macro 'GCC_DIAG_IGNORE_STMT'
MD5.xs: In function 'MD5_CTX* get_md5_ctx(PerlInterpreter*, SV*)':
MD5.xs: In function 'SV* new_md5_ctx(PerlInterpreter*, MD5_CTX*, const char*)':
ListUtil.xs: In function 'void XS_List__Util_zip(PerlInterpreter*, CV*)':
Socket.xs: In function 'void XS_Socket_inet_aton(PerlInterpreter*, CV*)':
HiRes.xs: In function 'void XS_Time__HiRes_setitimer(PerlInterpreter*, CV*)':
HiRes.xs: In function 'void XS_Time__HiRes_getitimer(PerlInterpreter*, CV*)':

Non-Fatal messages(gcc):



-- 
Report by Test::Smoke v1.71 running on perl 5.26.1
(Reporter v0.053 / Smoker v0.046)



nntp.perl.org: Perl Programming lists via nntp and http.
Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About